Alcatel-Lucent 7450 ESS Series Configuration Manual page 289

VRRP Network Interface Commands
config
* Note that VRRP commands are applicable to router interfaces, IES interfaces and VPRN,
The authentication-key, authentication-type, bfd-enable, and ssh-reply commands are applicable
only to IPv4 contexts, not IPv6.
7450 ESS OS Router Configuration Guide
— router
— [no] interface
— address
— no address
— [no]
— arp-timeout
— no arp-timeout
— description
— no description
— secondary
ones] [igp-inhibit]
— no secondary
— [no]
— static-arp
— [no]
— tos-marking-state
— no tos-marking-state
— unnumbered
— no unnumbered
— vrrp
— no vrrp
interface-name
{ip-address/mask | ip-address netmask} [broadcast all-ones | host-ones]
allow-directed-broadcasts
seconds
description-string
{ip-address/mask | ip-address netmask} [broadcast all-ones | host-
{ip-address/mask | ip-address netmask}
shutdown
ip-address ieee-address
static-arp ip-address
{trusted | untrusted}
[ip-int-name | ip-address]
virtual-router-id [owner] *
virtual-router-id
— authentication-key [authentication-key | hash-key] [hash | hash2]
— no authentication-key
— [no] backup ip-address
— [no] bfd-enable service-id interface interface-name dst-ip ip-address
— [no] bfd-enable interface interface-name dst-ip ip-address
— init-delay seconds
— no init-delay
— mac mac-address
— no mac
— [no] master-int-inherit
— message-interval {[seconds] [milliseconds milliseconds]}
— no message-interval
— [no] ping-reply
— policy policy-id
— no policy
— [no] preempt
— priority priority
— no priority
— [no] ssh-reply
— [no] standby-forwarding
— [no] telnet-reply
— [no] shutdown
— [no] traceroute-reply
VRRP
Page 289