Alcatel-Lucent 7450 ESS Series Configuration Manual page 193

===============================================================================
Interface Name
-------------------------------------------------------------------------------
intf1
intf2
-------------------------------------------------------------------------------
Interfaces : 2
===============================================================================
*A:Dut-T>config>router#
*A:Dut-T>config>service# show router network-domains "net1" sdp-association
===============================================================================
SDP Network Domain Association Table
===============================================================================
SDP Id
-------------------------------------------------------------------------------
100
-------------------------------------------------------------------------------
SDPs : 1
===============================================================================
*A:Dut-T>config>service#
policy
Syntax policy [name | damping | prefix-list name | as-path name | community name | admin]
Context show>router
Description This command displays policy-related information.
Parameters
name — Specify an existing policy-statement name.
damping — Specify damping to display route damping profiles.
prefix-list name — Specify a prefix list name to display the route policy entries.
as-path name — Specify the route policy AS path name to display route policy entries.
community name — Specify a route policy community name to display information about a particular
admin — Specify the admin keyword to display the entities configured in the config>router>policy-
Output Policy Output — The following table describes policy output fields.
Policy
Description
7450 ESS OS Router Configuration Guide
community member.
options context.
Label
The policy name.
Displays the description of the policy.
Port Network Domain
1/2/2 net1
6/1/2 net1
Network Domain
net1
Description
IP Router Configuration
Page 193