Table of Contents
Advertisement
protocol protocol-name — Displays routes learned from the specified protocol.
summary — Displays a route table summary information.
tunnel-endpoints — Specifies to include tunnel endpoint information.
next-hop-type tunneled — Displays only the tunneled next-hops. For each route entry, the tunnel
Output
Standard Route Table Output — The following table describes the standard output fields for the
route table.
Dest Address
Next Hop
Type
Protocol
Age
Metric
Pref
No. of Routes
Sample Output
*A:Dut-B# show router route-table
============================================================================
Route Table (Router: Base)
============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
----------------------------------------------------------------------------
10.10.1.0/24 Local Local 00h01m25s 0
ip-10.10.1.2 0
10.10.2.0/24 [L] Remote ISIS 00h00m58s 15
10.10.12.3 13
10.10.3.0/24 Local Local 00h01m25s 0
ip-10.10.3.2 0
10.10.4.0/24 Local Local 00h01m25s 0
ip-10.10.4.2 0
10.10.5.0/24 [L] Remote ISIS 00h00m58s 15
10.10.12.3 13
10.10.6.0/24 [L] Remote ISIS 00h00m58s 15
10.10.4.4 20
10.10.9.0/24 [L] Remote ISIS 00h00m58s 15
10.10.4.4 20
10.10.10.0/24 [L] Remote ISIS 00h00m58s 15
7450 ESS OS Router Configuration Guide
Values
local, sub-mgmt, managed, static, ospf, ospf3, isis, rip, aggregate, bgp, bgp-vpn
owner and tunnel ID is shown.
Label
The route destination address and mask.
The next hop IP address for the route destination.
Local — The route is a local route.
Remote — The route is a remote route.
The protocol through which the route was learned.
The route age in seconds for the route.
The route metric value for the route.
The route preference value for the route.
The number of routes displayed in the list.
IP Router Configuration
Description
Page 195
Advertisement
Table of Contents
