Table of Contents
Advertisement
Description
Parameters
receive-window-size
Syntax
Context
Description
session-limit
Syntax
Context
Description
Parameters
group
Syntax
Context
Description
Parameters
Page 110
This command specifies what to do in case the system receives a L2TP responsefrom another address
than the one the request was sent to.
accept — Specifies that this system accepts any source IP address change of received L2TP control
messages related to a locally originated tunnel in the state waitReply and rejectsany peer address
change for other tunnels; in case the new peer IPaddress is accepted, it is learned and used as
destination addressin subsequent L2TP messages.
ignore — Specifiesthat this system ignores any source IP address change of received L2TP control
messages, does not learn anynew peer IP address and does not change the destination address
insubsequent L2TP messages.
reject — Specifies that this system rejects any source IP address change of received L2TP control
messages and drops those messages.
receive-window-size [4..1024]
no receive-window-size
config>router>l2tp
This command configures the L2TP receive window size.
session-limit session-limit
no session-limit
config>router>l2tp
This command configures the L2TP session limit of this router.
session-limit — Specifies the session limit.
Values
1..131071
group tunnel-group-name [create]
no group tunnel-group-name
config>router>l2tp
This command configures an L2TP tunnel group.
tunnel-group-name — Specifies a name string to identify a L2TP group up to 63 characters in length.
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
