Table of Contents
Advertisement
Context
Description
Parameters
session-assign-method
Syntax
Context
Description
Default
Parameters
session-limit
Syntax
Context
Description
Default
Parameters
Page 118
no user-db
config>router>l2tp>group>ppp
This command configures the local user database to use for PPP PAP/CHAP authentication.
local-user-db-name — Specifies the local user database name.
Values
32 chars max
session-assign-method weighted
no session-assign-method
config>router>l2tp>group
This command specifies how new sessions are assigned to one of the set of suitable tunnels that are
available or could be made available.
no session-assign-method
weighted — specifies that the sessions are shared between the available tunnels. If necessary, new
tunnels are set up until the maximum number is reached. The distribution aims at an equal ratio
of the actual number of sessions to the maximum number of sessions.
Default
no session-assign-method. All new sessions are placed by preference in existing
tunnels.
Values
weighted — Enables weighted preference to tunnels in the group.
session-limit session-limit
no session-limit
config>router>l2tp>group
config>router>l2tp>group>tunnel
This command configures the session limit. The value controls how many L2TP session will be
allowed within a given context (system, group, tunnel).
The no form of the command removes the value from the configuration.
no session-limit
session-limit — Specifies the allowed number of sessions within the given context.
Values
1 — 131071
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
