Table of Contents
Advertisement
autonomous-system-type
Syntax
autonomous-system-type {origin | peer}
no autonomous-system-type
Context
config>cflowd>collector
Description
This command defines whether the autonomous system (AS) information included in the flow data is
based on the originating AS or external peer AS of the routes.
This option is only allowed if the collector is configured as Version 5 or Version 8.
The no form of this command resets the AS type to the default value.
Default
autonomous-system-type origin
Parameters
origin — Specifies that the AS information included in the flow data is based on the originating AS.
peer — Specifies that the AS information included in the flow data is based on the peer AS.
description
Syntax
description description-string
no description
Context
config>cflowd>collector
Description
This command creates a text description stored in the configuration file for a configuration context.
The no form of this command removes the description string from the context.
Default
No description is associated with the configuration context.
Parameters
description-string — The description character string. Allowed values are any string up to 80 charac-
shutdown
Syntax
[no] shutdown
Context
config>cflowd
config>cflowd>collector
Description
This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they may be deleted.
The no form of this command administratively enables an entity.
7450 ESS OS Router Configuration Guide
ters long composed of printable, 7-bit ASCII characters. If the string contains special characters
(#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Cflowd
Page 513
Advertisement
Table of Contents
