Remote Transaction Data - Toptech MultiLoad II Manual

Chapter 6 – Meter Commands
} tank_alarms;
Modbus:
Not supported.
6.21 R T
EMOTE RANSACTION
MRTDpppaaa
This command is used to get the batch data out of the Multiload2.
Where:
/* request transaction details for preset RTDpppaa
/* where RTD = Request Transaction Detail
/*
/*
/*
/* if aaa = 000 reply RTDpppaaannn
/* where RTD = Request Transaction Detail
/*
/*
/*
/*
/* if aaa > 000 reply RTDpppaaa...
/* where RTD = Request Transaction Detail
/*
/*
/*
/*
Modbus:
unsigned char unused15:1;
unsigned char unused16:1;
unsigned char unused17:1;
unsigned char unused18:1;
unsigned char unused19:1;
unsigned char unused20:1;
unsigned char unused21:1;
unsigned char unused22:1;
unsigned char unused23:1;
unsigned char unused24:1;
unsigned char unused25:1;
unsigned char unused26:1;
unsigned char unused27:1;
unsigned char unused28:1;
unsigned char unused29:1;
unsigned char unused30:1;
unsigned char unused31:1;
} flags;
D :
ATA
ppp = preset number
aaa = detail index
ppp = preset number
aaa = detail index request (=000)
nnn = number of details
ppp = preset number
aaa = detail index request (>000)
... = detail values (same as R800)
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
76