Toptech MultiLoad II Manual page 51

Chapter 6 – Meter Commands
xxxx= additive status #1 in hexadecimal as:
union
{
unsigned int value;
struct
{
} flags:
} additive_status_1;
unsigned char permissive_out:1;
unsigned char feedback_status:1;
unsigned char wm_clear_errors:1;
unsigned char unused1_3:1;
unsigned char unused1_4:1;
unsigned char unused1_5:1;
unsigned char unused1_6:1;
unsigned char unused1_7:1;
unsigned char unused1_8:1;
unsigned char unused1_9:1;
unsigned char unused1_10:1;
unsigned char unused1_11:1;
unsigned char unused1_12:1;
unsigned char unused1_13:1;
unsigned char unused1_14:1;
unsigned char unused1_15:1;
// permissive out output status
// additive feedback input status
// command to clear errors
// future use
// future use
// future use
// future use
// future use
// future use
// future use
// future use
// future use
// future use
// future use
// future use
// future use
51