Toptech MultiLoad II Manual page 115

Chapter 7 – Register Operations
Modbus: Read/Write Register=297, Len=1, 16-Bit Integer (ttttt)
... = Type Specific Commands
Modbus: Read/Write Register=298, Len=1, 16-Bit Integer (fffff)
Modbus: Read/Write Register=299, Len=1, 16-Bit Integer (ppppp)
Modbus: Read/Write Register=298, Len=1, 16-Bit Integer (fffff)
Modbus: Read/Write Register=299, Len=1, 16-Bit Integer (ppppp)
Modbus: Read/Write Register=300, Len=1, 16-Bit Integer (xxxxx)
ANALOG_OUT_MONITOR
//RTD
RTD
//Alarm Output Levels
BAY_RT_ALARM
PRESET_RT_ALARM
COMPONENT_RT_ALARM
METER_RT_ALARM
ADDITIVE_RT_ALARM
TANK_RT_ALARM
SAMPLER_RT_ALARM
// Allow Inputs from FCM outputs or External Communication
INTERNAL_INPUT
EXTERNAL_INPUT
// Scaling
SCALE_0_to_10000
// Range checking
RANGE_CHECK
// messages
EMAIL_MESSAGE
} type;
If type -= UNUSED, (No Further Parameters)
If type -= FCM_INPUT, fffffppppp
Where:
fffff – FCM Number (0-32)
ppppp – FCM Port (0-7)
If type -= FCM_OUTPUT, fffffpppppxxxxx
Where:
fffff – FCM Number (0-32)
ppppp – FCM Port (0-7)
xxxxx = Custom logic index (0000-1023).
If type -= RCU_RT, rrrrr
Where:
= 162,
= 170,
= 180,
= 181,
= 182,
= 183,
= 184,
= 185,
= 186,
= 190,
= 191
= 200,
= 210,
= 220
11
5