Toptech MultiLoad II Manual page 59

Chapter 6 – Meter Commands
xxxx= tank_status #1 in hexadecimal as:
union
{
unsigned int value;
struct
{
} flags:
} tank_status_1;
unsigned char program_clear_errors:1;
unsigned char remote_clear_errors:1;
unsigned char driver_clear_errors:1;
unsigned char clearing_errors:1;
unsigned char wm_clear_errors:1;
unsigned char open_tank_val:1;
unsigned char tank_val_status:1;
unsigned char close_tank_val:1;
unsigned char trigger_start_level:1;
unsigned char trigger_stop_level:1;
unsigned char unused1_10:1;
unsigned char unused1_11:1;
unsigned char unused1_12:1;
unsigned char unused1_13:1;
unsigned char unused1_14:1;
unsigned char unused1_15:1;
// command to clear errors
// command to clear errors
// command to clear errors
// currently clearing errors
// command to clear errors
// tank valve open
// tank valve status
// tank valve closed
// trigger start level
// trigger stop level
59