Sampleralarm Messages - Toptech MultiLoad II Manual

Chapter 7 – Register Operations
Read/Write Register=2598, Len=1, 16-Bit Integer (ppppp)
Read/Write Register=2599, Len=1, 16-Bit Integer (rrrrr)
Read/Write Register=cannot be accessed, Len=1, 16-Bit Integer (ttttt)
Read/Write Register=cannot be accessed, Len=1, 16-Bit Integer (mmmmmmmmm)
Read/Write Register=cannot be accessed, Len=1, 16-Bit Integer (nnnnn)
7.2.39 716 - S A
AMPLER
R716iii =>
U716iiilllllssssssssssssssssssssssssssssss =>
U716iiilllllsssssssssssssssssssssssssssssscccccppppprrrrr
U716iiilllllsssssssssssssssssssssssssssssscccccppppprrrrrttttt
U716iiilllllsssssssssssssssssssssssssssssscccccppppprrrrrtttttmmmmmmmmmnnnnn
=> 0?0
Where:
iii = Alarm Index with defaults as:
Note: For Modbus, not available.
lll = Alarm Level as:
ssssssssssssssssssssssssssssss = Alarm Message (prefix with an *)
ccccc = Promotion Count (00000=no promotion)
ppppp = Promoted Alarm Level as:
rrrrr = Reset Mode as:
M
LARM ESSAGES
0?0716iiilllllsssssssssssssssssssssssssssssscccccppppprrrrrttttt
struct alarm_def factory_sampler_alarm[16] =
{
{"*SAMP FCM" , AUTO_CLEAR}, // 716000
{"*SAMP PERM", AUTO_CLEAR}, // 716001
};
enum
{
AUTO_CLEAR = 0,
DRIVER_CLEAR = 1,
REMOTE_CLEAR = 2,
PROGRAM_CLEAR = 3,
WM_CLEAR = 4
}alarm_level;
Note: Up to 30 UTF-8 bytes to represent a max of 10 characters.
enum
{
AUTO_CLEAR = 0,
DRIVER_CLEAR = 1,
REMOTE_CLEAR = 2,
PROGRAM_CLEAR = 3,
WM_CLEAR = 4
}promoted_alarm_level;
0?0
=> 0?0
=> 0?0
15
7