Bay Alarm Messages - Toptech MultiLoad II Manual

Chapter 7 – Register Operations
7.2.34 710 - B A
AY LARM
R710iii =>
U710iiilllllssssssssssssssssssssssssssssss =>
U710iiilllllsssssssssssssssssssssssssssssscccccppppprrrrr
U710iiilllllsssssssssssssssssssssssssssssscccccppppprrrrrttttt
U710iiilllllsssssssssssssssssssssssssssssscccccppppprrrrrtttttmmmmmmmmmnnnnn
0?0
Where:
iii = Alarm Index with defaults as:
Note: For Modbus, the Modbus Bay Alarm Index Register sets the iii index.
Modbus: Read/Write Register=2500, Len=1, 16-Bit Integer (iii)
lll = Alarm Level as:
ssssssssssssssssssssssssssssss = Alarm Message (prefix with an *)
ccccc = Promotion Count (00000=no promotion)
ppppp = Promoted Alarm Level as:
M
ESSAGES
0?0710iiilllllsssssssssssssssssssssssssssssscccccppppprrrrrttttt
struct alarm_def factory_bay_alarm[31] =
{
{"*BAY FCM" , AUTO_CLEAR}, // 710000
{"*GROUND ", AUTO_CLEAR}, // 710001
{"*VRU ", AUTO_CLEAR}, // 710002
{"*OVERFILL ", AUTO_CLEAR}, // 710003
{"*ESD PERM ", AUTO_CLEAR}, // 710004
{"*BAY PERM4", AUTO_CLEAR}, // 710005
{"*BAY PERM5", AUTO_CLEAR}, // 710006
{"*BAY PERM6", AUTO_CLEAR}, // 710007
{"*BAY PERM7", AUTO_CLEAR}, // 710008
{"*ALL STOP" , AUTO_CLEAR}, // 710009
{"*BAY PCM ", AUTO_CLEAR}, // 710010
{"*PRNTR ERR", AUTO_CLEAR}, // 710011
{"*GPS ERROR", AUTO_CLEAR}, // 710012
{"*BALARM 13", DRIVER_CLEAR}, // 710013
{"*BALARM 14", DRIVER_CLEAR}, // 710014
{"*FCM TRACE", DRIVER_CLEAR}// 710015
};
enum
{
AUTO_CLEAR = 0,
DRIVER_CLEAR = 1,
REMOTE_CLEAR = 2,
PROGRAM_CLEAR = 3,
WM_CLEAR = 4
}alarm_level;
Note: Up to 30 UTF-8 bytes to represent a max of 10 characters.
0?0
=>
=>
(MultiLoad Mobile Only)
0?0
0?0
=>
14
7