Toptech MultiLoad II Manual page 48

Chapter 6 – Meter Commands
xxxx= component status #1 in hexadecimal as:
union
{
unsigned int value;
struct
{
} flags:
} component_status_1;
unsigned char blend_ready:1;
unsigned char blend_complete:1;
unsigned char flush_ready:1;
unsigned char flush_complete:1;
unsigned char sequential_delivery:1;
unsigned char clearing_batch:1;
unsigned char gross_value_measured_for_trade:1; // gross value is W&M approved
unsigned char wm_clear_errors:1;
unsigned char unused1_8:1;
unsigned char unused1_9:1;
unsigned char unused1_10:1;
unsigned char unused1_11:1;
unsigned char unused1_12:1;
unsigned char unused1_13:1;
unsigned char unused1_14:1;
unsigned char unused1_15:1;
// component blend ready
// component blend complete
// component flush ready
// component flush complete
// component to be sequentially delivered
// component batch in process of clearing
// command to clear errors
// future use
// future use
// future use
// future use
// future use
// future use
// future use
// future use
48