Preset Alarm Messages - Toptech MultiLoad II Manual

Chapter 7 – Register Operations
7.2.35 711 - P A
RESET LARM
R711iii =>
U711iiilllllssssssssssssssssssssssssssssss =>
U711iiilllllsssssssssssssssssssssssssssssscccccppppprrrrr
U711iiilllllsssssssssssssssssssssssssssssscccccppppprrrrrttttt
U711iiilllllsssssssssssssssssssssssssssssscccccppppprrrrrtttttmmmmmmmmmnnnnn
=> 0?0
Where:
iii = Alarm Index with defaults as:
Note: For Modbus, the Modbus Preset Alarm Index Register sets the iii index.
Modbus: Read/Write Register=2520, Len=1, 16-Bit Integer (iii)
lll = Alarm Level as:
ssssssssssssssssssssssssssssss = Alarm Message (prefix with an *)
ccccc = Promotion Count (00000=no promotion)
ppppp = Promoted Alarm Level as:
M
ESSAGES
0?0711iiilllllsssssssssssssssssssssssssssssscccccppppprrrrrttttt
struct alarm_def factory_preset_alarm[31] =
{
{"*PRE FCM" , AUTO_CLEAR}, // 711000
{"*PRE PERM" , AUTO_CLEAR}, // 711001
{"*SWING ARM", AUTO_CLEAR}, // 711002
{"*NO LNFLSH", DRIVER_CLEAR}, // 711003
{"*PALARM 04", DRIVER_CLEAR}, // 711004
{"*BAY ALARM", AUTO_CLEAR}, // 711005
{"*COMP ALRM", AUTO_CLEAR}, // 711006
{"*ADD ALARM", AUTO_CLEAR}, // 711007
{"*MTR STOP" , AUTO_CLEAR}, // 711008
{"*OVERRUN" , REMOTE_CLEAR}, // 711009
{"*EXCESS FL", REMOTE_CLEAR}, // 711010
{"*BSW", DRIVER_CLEAR}, // 711011
{"*PALARM 12", DRIVER_CLEAR}, // 711012
{"*PALARM 13", DRIVER_CLEAR}, // 711013
{"*PALARM 14", DRIVER_CLEAR}, // 711014
{"*INVCONFIG", AUTO_CLEAR} // 711015
};
enum
{
AUTO_CLEAR = 0,
DRIVER_CLEAR = 1,
REMOTE_CLEAR = 2,
PROGRAM_CLEAR = 3,
WM_CLEAR = 4
}alarm_level;
Note: Up to 30 UTF-8 bytes to represent a max of 10 characters.
0?0
=> 0?0
=> 0?0
14
9