Configurable Language Prompts - Toptech MultiLoad II Manual

Chapter 7 – Register Operations
nnnnnnnnnnnnnnn = Site Name (15 Characters Padded)
+lllllllll = Site Latitude Position.
+ooooooooo = Site Longitude Position.
Note: An Update to index 0 will clear the entire list.
Note: Latitude format (S 90 to N 90) is:
if Latitude >= 0 then "N" else "S"
Note: Longitude format (180 E to 180 W) is:
if Longitude >= 0 then "E" else "W"
Modbus:
Read/Write Register=2351, Len=15, Characters (nnnnnnnnnnnnnnn)
Read/Write Register=2366, Len=2, 32-Bit Signed Integer (+lllllllll)
Read/Write Register=2368, Len=2, 32-Bit Signed Integer (+ooooooooo)
7.2.33 700 - C
ONFIGURABLE
R700iil =>
U700iilsss...
Where:
ii = Prompt Index with defaults as:
Note: For Modbus, the Modbus Language Prompt Index Register sets the ii index.
Modbus: Read/Write Register=2400, Len=1, 16-Bit Integer (ii)
l = Language Index (0 or 1)
Note: For Modbus, the Modbus Language Prompt Language Index Register sets the l index.
Modbus: Read/Write Register=2401, Len=1, 16-Bit Integer (l)
sss... = Prompt string (40 ASCII characters or 20 UTF-8 characters, 3-bytes each)
Note: if prompt string empty, null, built in prompt will be used based on language setting.
Note: only the prompts listed above can be changed.
Modbus:
Read/Write Register=2402, Len=60, Characters (sss...)
integer_degrees = abs(Latitude) / 60000
float_minutes = (abs(Latitude) % 60000) / 1000
integer_degrees = abs(Longitude) / 60000
float_minutes = (abs(Longitude) % 60000) / 1000
L P
ANGUAGE ROMPTS
0?0700iilsss...
=> 0?0
00 = "Insert driver card..."
01 = "For Access"
02 = "Invalid Driver..."
03 = "Remove Card..."
04 = "Please Wait..."
07 = "Press 'A' key to Begin..."
19 = "A=Next B=Prev C=Abort D=Pick"
20= "System Unavailable"
28 = "PRE PRODUCT
35 = "" // Alternate Load Screen Footer
SET DEL STATUS "
14
6