Installing insertion tubes
Installing insertion
tubes
OI/LS4000/NH3/H2O-EN
The installation steps for the insertion tubes are identical for the
transmitter unit and the receiver unit.
No.
Meaning
Installation flange
1
Insertion tube
2
Purging flange O-ring
3
Purging flange
4
Install the insertion tubes as follows:
Step
Procedure
1
Screw the insertion tube 2 into the purging flange 4 until it stops.
2
Insert the purging flange O-ring 3 between the installation flange 1
and the purging flange 4 into the groove of the purging flange.
3
Install the purging flange 4 on the installation flange 1.
Operating instruction LS4000 for NH
and H
O
3
2
21