Installation procedure menu
Intended use
Description
Configuration
routine
OI/LS4000/NH3/H2O-EN
Call up the configuration assistant
Start the 7-step configuration routine
Name
Log out
Cancel
Next
Step
Procedure
1
Enter the length of the connection cable (see page 64).
2
Enter physical properties for the process (see page 65).
3
Enter physical properties for the flanges (see page 67).
4
Enter physical properties for the measuring environment (see page
69).
5
Configure measuring channels (see page 70).
6
Configure analog and digital outputs (see page 72).
7
Check settings and save or reject (see page 74).
End configuration routine.
Operating instruction LS4000 for NH
Meaning/function
Log out and return to the main menu
Exit menu
Start configuration routine
and H
O
3
2
63