Connecting The Pc To The Junction Box - ABB LS4000 Operating Instructions Manual

Connecting the PC to the junction box

Connecting the PC
OI/LS4000/NH3/H2O-EN
An RJ45 adapter board is provided for connecting the analyzer to a
PC.
Proceed as follows:
Step Procedure
1 Open the junction box.
2 Connect the RJ45 adapter board to terminals 23–26 in the junction
box.
3 Connect the PC to the RJ45 adapter board using a patch cable.
Connections to the terminal strip are made as follows:
Terminal Signal
23 ETH TX+
24 ETH TX-
25 ETH RX+
26 ETH RX-
Operating instruction LS4000 for NH
Function
Ethernet TX+
Ethernet TX-
Ethernet RX+
Ethernet RX-
and H O
3 2
55