Installing A Sim Card - ABB AquaMaster Instruction Manual

Electronic Commercial Water Meter
AquaMaster™

2.4.3 Installing a SIM Card

If the transmitter is not fixed in any way, arrange or
1
hold it with the top cover uppermost.
Wash off any loose dirt from the case using plain
2
water.
3 Remove the transmitter top cover and battery
mounting tray – see Fig. 3.12.
Slide to unlock and open the
SIM card holder cover
Fig. 2.22 Installing a SIM Card
Warning. Disconnect all power from the transmitter before opening the SIM card holder. If the power is
not disconnected the SIM card may be corrupted and therefore be unusable.
12
4
Close the SIM card holder cover and slide into
6
locked position.
7 Refit the battery mounting tray and the transmitter
top cover – see Fig. 3.12.
2 Mechanical Installation
5 Insert the SIM card,
contact side down
and bevelled edge
first, into the SIM card
holder.
IM/AM Issue 13