Connecting To The Instrument Software - ABB LS4000 Operating Instructions Manual

Connecting to the instrument software

Instrument software
in the web browser
Connecting the
devices
Starting the
instrument software
56
The instrument software is an integral component of the transmitter unit and
the receiver unit. It is accessed via a web browser.
The Web browsers Mozilla
use with the device software.
Note: Mozilla and Firefox are registered trademarks of the Mozilla Foundation.
Chrome is a trademark of Google Inc.
Proceed as follows:
Step Procedure
1 Ensure that transmitter unit and receiver unit are connected to the
junction box and ready for operation.
2 Ensure that a PC is connected to the junction box.
To start the instrument software, you need the IP address of the
analyzer.
The factory-set IP address is provided in the analyzer data sheet.
Proceed as follows:
Step Procedure
1 Start up the PC.
2 Start up the web browser on your computer.
3 In your web browser, type the IP address of the analyzer.
The user interface of the instrument software is displayed:
Operating instruction LS4000 for NH
® Firefox ® and Google Chrome
and H O
3 2
TM are approved for
OI/LS4000/NH3/H2O-EN