Iii-1-4 Access Control - Draytek Vigor2860 series User Manual

After finishing all the settings here, please click OK to save the configuration.
I I I - 1 - 4 A
I I I - 1 - 4 A
In the Access Control, the router may restrict wireless access to certain wireless clients only
by locking their MAC address into a black or white list. The user may block wireless clients by
inserting their MAC addresses into a black list, or only let them be able to connect by inserting
their MAC addresses into a white list.
In the Access Control web page, users may configure the white/black list modes used by each
SSID and the MAC addresses applied to their lists.
Available settings are explained as follows:
Item
Enable Mac Address Filter
MAC Address Filter
Client's MAC Address
260
All wireless devices must support the same WEP encryption
bit size and have the same key. Four keys can be entered
here, but only one key can be selected at a time. The keys
can be entered in ASCII or Hexadecimal. Check the key you
wish to use.
c c e s s C o n t r o l
c c e s s C o n t r o l
Description
Select to enable the MAC Address filter for wireless LAN
identified with SSID 1 to 4 respectively. All the clients
(expressed by MAC addresses) listed in the box can be
grouped under different wireless LAN. For example, they can
be grouped under SSID 1 and SSID 2 at the same time if you
check SSID 1 and SSID 2.
Display all MAC addresses that are edited before.
Manually enter the MAC address of wireless client.
Vigor2860 Series User's Guide