Data Logger - GE G30 Instruction Manual

6 ACTUAL VALUES
A trigger can be forced here at any time by setting "Yes" to the
menu for information on clearing the oscillography records.
CLEAR RECORDS

PATH: ACTUAL VALUES RECORDS
 DATA LOGGER

MESSAGE
The represents the time at which the oldest available samples were taken. It will be static until the log
OLDEST SAMPLE TIME
gets full, at which time it will start counting at the defined sampling rate. The
most recent samples were taken. It counts up at the defined sampling rate. If the data logger channels are defined, then
both values are static.
Refer to the 
COMMANDS CLEAR RECORDS
GE Multilin
FORCE TRIGGER?


DATA LOGGER

OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
2000/01/14 15:21:19
menu for clearing data logger records.
G30 Generator Protection System
6.4 RECORDS
command. Refer to the
6.4.4 DATA LOGGER
represents the time the
NEWEST SAMPLE TIME

COMMANDS
6
6-27