Parameterizing The Pmu On The Device - Siemens 6MD85 Manual

[scpmubif-210415, 1, en_US]
Figure 9-16
Routing Indications
The routable indication
•
raises when the PMU is connected to the PDC
•
clears when the connection to the PDC is interrupted.
[scparami-260912-01.tif, 1, en_US]
Figure 9-17

Parameterizing the PMU on the Device

9.5.7
You can also change the PMU settings directly on the device. To do this, select the desired PMU instance on
the device display. By selecting menu item Settings you then access the editable setting values (see
Figure 9-18). Note that the parameter Port cannot be changed, because this corresponds to the physical slot
position of the communication module in question.
SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017
Information Routing in DIGSI 5
ChannelLive of the PMU log
Log Indication for Display of the PMU/PDC Connection
Measured Values, Energy Values, and Supervision of the Primary System
9.5 Phasor Measurement Unit (PMU)
1015