GE L60 Instruction Manual page 124

4.3 FACEPLATE INTERFACE
c) EXAMPLE MENU NAVIGATION
 ACTUAL VALUES
 STATUS

 SETTINGS
 PRODUCT SETUP

 SETTINGS
 SYSTEM SETUP

 SECURITY

4

ACCESS LEVEL:
Restricted

 SECURITY


 DISPLAY
 PROPERTIES

FLASH MESSAGE
TIME: 1.0 s
4-26
Press the MENU key until the header for the first Actual Values page appears. This
page contains system and relay status information. Repeatedly press the MESSAGE
keys to display the other actual value headers.
Press the MENU key until the header for the first page of Settings appears. This page
contains settings to configure the relay.
Press the MESSAGE DOWN key to move to the next Settings page. This page con-
tains settings for System Setup. Repeatedly press the MESSAGE UP and DOWN
keys to display the other setting headers and then back to the first Settings page
header.
From the Settings page one header (Product Setup), press the MESSAGE RIGHT
key once to display the first sub-header (Security).
Press the MESSAGE RIGHT key once more and this will display the first setting for
Security. Pressing the MESSAGE DOWN key repeatedly will display the remaining
setting messages for this sub-header.
Press the MESSAGE LEFT key once to move back to the first sub-header message.
Pressing the MESSAGE DOWN key displays the second setting sub-header associ-
ated with the Product Setup header.
Press the MESSAGE RIGHT key once more to display the first setting for Display
Properties.
L60 Line Phase Comparison System
4 HUMAN INTERFACES
GE Multilin