Handling Setting Data; Scene Files - Panasonic HC-X2000 Owner's Manual

Handling setting data

Scene files

File structure of the setting data
The scene files of [F1:] to [F6:] can be saved in the main unit memory in accordance to the scene file number.
What can be saved as a scene file is the setting contents of the [SCENE FILE] menu.
In addition, the current setting values of the scene files of [F1:] to [F6:] can be saved as a file to the main unit memory and the memory card, and that data
can be loaded and used in the unit.
Setting data file structure of the unit is as follows.

[F1:] [F2:]
*1 *1

[F1:] [F2:]
*2 *2

[F1:] [F2:]
[F1:] [F2:]
[F1:] [F2:]
*1 The scene file can be initialized.
Select the [SCENE FILE] menu → [LOAD/SAVE/INITIALIZE] → [INITIALIZE].
*2 Current setting value of each scene file can be individually saved in the main unit memory. Also, the scene files saved in the main unit memory can be loaded.
Select the [SCENE FILE] menu → [LOAD/SAVE/INITIALIZE] → [LOAD]/[SAVE].
*3 The scene file can be saved to the memory card in card slot 1. Also, the scene files saved in the memory card can be loaded.
Saving the scene file
Saving the scene file into the main unit memory
Saves the current setting value of the unit into the main unit memory.
1
Select the [SCENE FILE] menu → [LOAD/SAVE/INITIALIZE] → [SAVE].
2
Select [SET].
The file is saved.
Saving the scene file to the memory card
The scene file can be overwritten to a file on the memory card in card slot 1, or saved as a new file.
∫ Saving the scene file as a new file to the memory card
Specify a file name to save the current setting values of the unit to the memory card in card slot 1 as a new file.
1
Select the [OTHERS] menu → [FILE] → [SCENE FILE(SD CARD)] → [SAVE AS].
The file name entry screen and the keyboard are displayed.
2
Enter the text to set with the keyboard.
≥ For information about entering text, refer to page 178.
Chapter 4 Operation — Handling setting data

[F3:] [F4:] [F5:]
*1 *1 *1
[F3:] [F4:] [F5:]
*2 *2 *2
[F3:] [F4:] [F5:]
*3


[F3:] [F4:] [F5:]

[F3:] [F4:] [F5:]
1 The unit
2 Memory card
A (Factory setting)
[F6:]
B (Current value)
C (Value saved on the main unit)
*1
D Scene file 1
E Scene file n
[F6:]
*2
[F6:]
[F6:]
[F6:]
- 100 -