Pin Code - Fujitsu Arrows ef FJL21 Basic Manual

● Lock No.
Example of usage To use the "NFC/Osaifu-Keitai lock"
Initial value 1234
PIN code
■ PIN code
To prevent unauthorized use of the au Micro IC Card (LTE) by
a third party, you can set the product to require PIN code
entry every time the power is turned on. You also need to
enter PIN code when setting whether PIN code entry is
required.
If PIN code is incorrectly entered three times consecutively,
the PIN code will be locked. You can unlock the PIN code
using PUK code.
• PIN code is "1234" and PIN code entry is set to not be
required at the time of purchase. You can change PIN code
to any 4- to 8-digit number, and set PIN code entry to be
required as necessary.
■ PUK code
In case PIN code is locked, you can unlock it by entering
PUK code.
• PUK code is an 8-digit number given at the time of
purchase, which is printed on the back side of the plastic
card on which your au Micro IC Card (LTE) is attached.
• After entering PUK code, you need to set a new PIN code.
• If PUK code is incorrectly entered 10 times consecutively,
contact an au shop, PiPit or Customer Service Center.
◎ "PIN code" is not reset by initializing the product.
18