Switching-Tlv (L2Vpn) - Cisco XR 12000 Series Command Reference Manual

switching-tlv (L2VPN)

switching-tlv (L2VPN)
To advertise the switching point type-length variable (TLV) in the label binding, use the switching-tlv
command in the pseudowire class configuration mode. To disable the display of the TLV, use the no form of
this command.
switching tlv hide
no switching tlv
Syntax Description
hide
Command Default
Switching point TLV data is advertised to peers.
Command Modes
L2VPN pseudowire class encapsulation mode
Command History
Release
Release 4.1.1
Usage Guidelines
The pseudowire switching point TLV information includes the following information:
• Pseudowire ID of the last pseudowire segment traversed
• Pseudowire switching point description
• Local IP address of the pseudowire switching point
• Remote IP address of the last pseudowire switching point that was crossed or the T-PE router
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
140
Hides TLV.
Modification
This command was introduced.
Operations
read, write
Virtual Private Network Commands
OL-28460-01