Show L2Vpn Pwhe - Cisco XR 12000 Series Command Reference Manual

show l2vpn pwhe

show l2vpn pwhe
To display the pseudowire headend (PWHE) information, use the show l2vpn pwhe command in EXEC
mode.
show l2vpn pwhe {detail| interface| summary}
Syntax Description
detail
interface
summary
Command Default
None
Command Modes
EXEC
Command History
Release
Release 4.2.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples This example show the sample output for show l2vpn pwhe detail command:
RP/0/0/CPU0:router# show l2vpn pwhe detail
Interface: PW-Ether1
Interface handle 0x20000070
MTU:
BW:
Interface MAC addresses: 0279.96e9.8205
Label: 16000
L2-overhead: 0
VC-type: 5
CW: N
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
124
Specifies the details of the interface.
Specifies the name of the interface.
Specifies the summary information of the interface.
Interface State: Down, Admin state: Up
1514
10000 Kbit
Modification
This command was introduced.
Operations
read
Virtual Private Network Commands
OL-28460-01