Cisco XR 12000 Series Command Reference Manual page 194

notification (VPLS)
Examples
The following example shows how both a syslog message and an SNMP trap are generated with the bridge
bar and learns more MAC addresses than the configured limit:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# bridge group 1
RP/0/0/CPU0:router(config-l2vpn-bg)# bridge-domain bar
RP/0/0/CPU0:router(config-l2vpn-bg-bd)# mac
RP/0/0/CPU0:router(config-l2vpn-bg-bd-mac)# limit
RP/0/0/CPU0:router(config-l2vpn-bg-bd-mac-limit)# notification both
Related Commands
Command
action (VPLS), on page 155
bridge-domain (VPLS), on page 159
bridge group (VPLS), on page 161
l2vpn, on page 49
mac (VPLS), on page 175
maximum (VPLS), on page 177
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
186
Description
Configures bridge behavior when the number of learned MAC
addresses reaches the MAC limit configured.
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
Creates a bridge group so that it can contain bridge domains and then
to assign network interfaces to the bridge domain.
Enters L2VPN configuration mode.
Enters L2VPN bridge group bridge domain MAC configuration
mode.
Configures the specified action when the number of MAC addresses
learned on a bridge is reached.
Virtual Private LAN Services Commands
OL-28460-01