L2Vpn Switchover - Cisco XR 12000 Series Command Reference Manual

Virtual Private Network Commands

l2vpn switchover

To force a manual pseudowire switchover, use the l2vpn switchover command in EXEC mode.
l2vpn switchover xconnect neighbor IP-address pw-id value
Syntax Description
xconnect
neighbor IP-address
pw-id value
Command Default
None
Command Modes
EXEC
Command History
Release
Release 4.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
If the backup exists, you can switch a primary router over to the backup router. You can use the l2vpn
switchover command to reactivate the primary router.
Task ID
Task ID
l2vpn
Examples The following example shows how to switch a primary pseudowire to a backup pseudowire:
RP/0/0/CPU0:router# l2vpn switchover xconnect neighbor 10.1.1.1 pw-id 2
OL-28460-01
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
Configures the switchover for the cross-connect.
Configures the peer for the cross-connect.
Configures the pseudowire ID. The range is from 1 to 4294967295.
Modification
This command was introduced.
Operations
read, write, execute
l2vpn switchover
51