Show L2Vpn Resource - Cisco XR 12000 Series Command Reference Manual

show l2vpn resource

show l2vpn resource
To display the memory state in the L2VPN process, use the show l2vpn resource command in EXEC mode.
show l2vpn resource
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.4.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples The following example shows sample output for the show l2vpn resource command:
RP/0/0/CPU0:router# show l2vpn resource
Memory: Normal
describes the significant fields shown in the
on page 126
Table 8: show l2vpn resource Command Field Descriptions
Field
Memory
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
126
Modification
This command was introduced.
Operations
read
display.Table 8: show l2vpn resource Command Field Descriptions,
Description
Displays memory status.
Virtual Private Network Commands
OL-28460-01