Transport Mode (L2Vpn) - Cisco XR 12000 Series Command Reference Manual

transport mode (L2VPN)

transport mode (L2VPN)
To configure L2VPN pseudowire class transport mode, use the transport mode command in L2VPN
pseudowire class MPLS encapsulation mode. To disable the L@VPN pseudowire class transport mode
configuration, use the no form of this command.
transport mode {ethernet| vlan }
no transport mode {ethernet| vlan }
Syntax Description
ethernet
vlan
Command Default
None
Command Modes
L2VPN pseudowire class MPLS encapsulation
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
All L2VPN configurations can be deleted using the no l2vpn command.
Note
Task ID
Task ID
l2vpn
Examples This example shows how to configure Ethernet transport mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# pw-class kanata01
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
148
Configures Ethernet port mode.
Configures VLAN tagged mode.
Modification
This command was introduced.
Operations
read, write
Virtual Private Network Commands
OL-28460-01