Tag-Rewrite - Cisco XR 12000 Series Command Reference Manual

tag-rewrite

tag-rewrite
To configure VLAN tag rewrite, use the tag-rewrite command in Encapsulation MPLS configuration mode.
To disable VLAN tag rewrite, use the no form of this command.
tag-rewrite ingress vlan vlan-id
no tag-rewrite ingress vlan vlan-id
Syntax Description
ingress
vlan
vlan-id
Command Default
None
Command Modes
Encapsulation MPLS configuration
Command History
Release
Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The tag-rewrite command is applicable only to pseudowires with MPLS encapsulation.
Task ID
Task ID
l2vpn
Examples The following example shows how to configure preferred-path tunnel settings:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# pw-class kanata01
RP/0/0/CPU0:router(config-l2vpn-pwc)# encapsulation mpls
RP/0/0/CPU0:router(config-l2vpn-pwc-encap-mpls)# tag-rewrite vlan 2000
RP/0/0/CPU0:router(config-l2vpn-pwc-encap-mpls)#
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
144
Configures ingress mode.
Configures VLAN tagged mode
Specifies the value of the ID of the VLAN.
Modification
This command was introduced.
Operations
read, write
Virtual Private Network Commands
OL-28460-01