Description (Global) - Cisco XR 12000 Series Command Reference Manual

Virtual Private Network Commands

description (GLOBAL)

To specify the description of a multisegment pseudowire globally, use the description command in l2vpn
configuration mode. To revert, use the no form of the command.
description description-name
no description
Syntax Description
description-name
Command Default
None
Command Modes
l2vpn
Command History
Release
Release 4.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples The example shows how to specify the description of a multisegment pseudowire:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# description S-PE1
Related Commands
Command
description (XCONNECT), on page 26
OL-28460-01
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
Name of the description of the multisegment pseudowire.
Modification
This command was introduced.
Operation
read, write
Description
Specifies the description of an l2vpn cross connect.
description (GLOBAL)
25