Pw-Ether - Cisco XR 12000 Series Command Reference Manual

Virtual Private Network Commands

pw-ether

To configure a PWHE Ethernet interface, use the pw-ether command in global configuration mode or in p2p
configuration submode. To return to the default behavior, use the no form of this command.
pw-ether value
no pw-ether value
Syntax Description
value
Command Default
None
Command Modes
Global configuration
p2p configuration
Command History
Release
Release 4.2.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
interface (global configuration)
l2vpn (p2p configuration)
Examples
This example shows the sample output of a PWHE Ethernet interface configuration in global configuration
mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# interface pw-ether 78
RP/0/0/CPU0:router(config-if)#
OL-28460-01
Value of the PWHE Ethernet interface. The range is from 1 to 32768.
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
Modification
This command was introduced.
attach generic-interface-list interfacelist1
pw-ether
Operation
read, write
read, write
71