Mpls Static Label (Vpls) - Cisco XR 12000 Series Command Reference Manual

Virtual Private LAN Services Commands

mpls static label (VPLS)

To configure the MPLS static labels and the static labels for the access pseudowire configuration, use the
mpls static label command in L2VPN bridge group bridge domain VFI pseudowire configuration mode. To
assign the dynamic MPLS labels to either the virtual forwarding interface (VFI) pseudowire or the access
pseudowire, use the no form of this command.
mpls static label local value value remote value
no mpls static label local value value remote value
Syntax Description
local value
remote value
Command Default
By default, the router attempts to assign dynamic labels to the pseudowire.
Command Modes
L2VPN bridge group bridge domain Access/VFI pseudowire configuration
Command History
Release
Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Ensure that both ends of the pseudowire have matching static labels.
Task ID
Task ID
l2vpn
OL-28460-01
Configures the local pseudowire label.
Use the show mpls label range command to obtain the range for the
Note
local labels.
Configures the remote pseudowire label.
The range of values for the remote labels depends on the label allocator
Note
of the remote router.
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
Modification
This command was introduced.
Operations
read, write
mpls static label (VPLS)
179