Password (L2Tp) - Cisco XR 12000 Series Command Reference Manual

Virtual Private Network Commands

password (L2TP)

To define the password and password encryption type for control channel authentication, use the password
command in L2TP class configuration mode. To return to the default behavior, use the no form of this
command.
password [0| 7] password
no password
Syntax Description
0
7
password
Command Default
None
Command Modes
Global configuration
Command History
Release
Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples The following example shows how to define an unencrypted password using the word "cisco" for control
channel authentication:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2tp-class sanjose
RP/0/0/CPU0:router(config-l2tp-class)# password 0 cisco
OL-28460-01
(Optional) Specifies that an unencrypted password will follow.
(Optional) Specifies that an encrypted password will follow.
Unencrypted or clear text user password.
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
Modification
This command was introduced.
Operations
read, write
password (L2TP)
63