Description (Xconnect) - Cisco XR 12000 Series Command Reference Manual

description (XCONNECT)

description (XCONNECT)
To specify the description of an l2vpn xconnect such as attachment circuit (AC) AC-AC, AC-PW, and
multisegment pseudowire (MS-PW), use the description command in L2VPN xconnect mode. To revert, use
the no form of the command.
description description-name
no description
Syntax Description
description-name
Command Default
None
Command Modes
L2VPN xconnect
Command History
Release
Release 4.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples The example shows how to specify the description of a cross connect:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)#
RP/0/0/CPU0:router(config-l2vpn-xc)#
RP/0/0/CPU0:router(config-l2vpn-xc-p2p)#
Related Commands
Command
description (GLOBAL), on page 25
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
26
Name of the description of the cross connect.
Modification
This command was introduced.
Operation
read, write
xconnect group MS-PW1
p2p ms-pw1
description MS-PW from T-PE1 to T-PE2
Description
Specifies multisegment pseudowire global description.
Virtual Private Network Commands
OL-28460-01