Show L2Tp Class - Cisco XR 12000 Series Command Reference Manual

show l2tp class

show l2tp class
To display information about an L2TP class, use the show l2tp class command in EXEC mode.
show l2tp class name name
Syntax Description
name name
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples The following example shows sample output for the show l2vtp session class command:
RP/0/0/CPU0:router# show l2tp class name kanata_02
l2tp-class kanata_02
manually configured class
configuration parameters:
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
86
(not) hidden
(no) authentication
(no) digest
digest check enable
hello 60
(no) hostname
(no) password
(no) accounting
(no) security crypto-profile
(no) ip vrf
receive-window 888
retransmit retries 15
Configures an L2TP class name.
Modification
This command was introduced.
Operations
read, write
Virtual Private Network Commands
OL-28460-01