Rollover (L3Vpn) - Cisco XR 12000 Series Command Reference Manual

rollover (L3VPN)

rollover (L3VPN)
To configure rollover times for a tunnel-template, use the rollover command in tunnel encapsulation l2tp
configuration mode. To return to the default behavior, use the no form of this command.
rollover periodic time holdown time
no rollover periodic time holdown time
Syntax Description
periodic time
holddowntime
Command Default
None
Command Modes
tunnel encapsulation l2tp configuration
Command History
Release
Release 3.5.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The name of the point-to-point cross-connect string is a free format description string.
Task ID
Task ID
l2vpn
Examples The following example shows how to configure rollover times for a tunnel-template:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# tunnel-template kanata_9
RP/0/0/CPU0:router(config-tuntem) encapsulation l2tp
RP/0/0/CPU0:router(config-tunencap-l2tp)# rollover
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
80
Configures the periodic rollover time in seconds. Range is 60 to 31536000.
Configures the holddown time for old session cookie values.
Modification
This command was introduced.
Operations
read, write
Virtual Private Network Commands
OL-28460-01