Hello-Interval (L2Tp) - Cisco XR 12000 Series Command Reference Manual

Virtual Private Network Commands

hello-interval (L2TP)

To configure the hello-interval value for L2TP (duration between control channel hello packets), use the hello
interval (L2TP) command in L2TP class configuration mode. To return to the default behavior, use the no
form of this command.
hello-interval interval
no hello-interval interval
Syntax Description
interval
Command Default
interval: 60 seconds
Command Modes
L2TP class configuration
Command History
Release
Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples The following example shows how to configure the hello-interval value for L2TP to 22 seconds:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2tp-class cisco
RP/0/0/CPU0:router(config-l2tp-class)# hello-interval 22
Related Commands
Command
authentication (L2TP), on page 4
OL-28460-01
Interval (in seconds) between control channel hello packets. The range is from 0 to
1000. Default is 60 seconds.
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
Modification
This command was introduced.
Operations
read, write
Description
Enables L2TP authentication for a specified L2TP class name.
hello-interval (L2TP)
29