Pw-Grouping - Cisco XR 12000 Series Command Reference Manual

Virtual Private Network Commands

pw-grouping

To enable Pseudowire Grouping, use the pw-grouping command in L2vpn configuration submode. To return
to the default behavior, use the no form of this command.
pw-grouping
no pw-grouping
Syntax Description
pw-grouping
Command Default
PW-grouping is disabled by default.
Command Modes
L2VPN configuration submode
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples This example shows the sample output of pw-grouping configuration in L2VPN configuration submode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# pw-grouping
Related Commands
Command
l2vpn, on page 49
show l2vpn, on page 95
OL-28460-01
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
Enables Pseudowire Grouping.
Modification
This command was introduced.
Operation
read, write
Description
Enters L2VPN configuration mode.
Displays L2VPN information
pw-grouping
73