Clear L2Tp Counters Control Tunnel - Cisco XR 12000 Series Command Reference Manual

clear l2tp counters control tunnel

clear l2tp counters control tunnel
To clear L2TP control counters for a tunnel, use the clear l2tp counters control tunnel command in EXEC
mode.
clear l2tp counters control tunnel {all| authentication| id tunnel id}
Syntax Description
all
authentication
id tunnel id
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples The following example shows how to clear all L2TP control tunnel counters:
RP/0/0/CPU0:router# clear l2tp counters control tunnel all
Related Commands
Command
clear l2tp counters control session, on page 10
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
12
Clears all L2TP counters, except authentication counters
Clears tunnel authentication counters.
Clears a specified counter. Range is 1 to 4294967295.
Modification
This command was introduced.
Operations
read, write
Description
Clears L2TP control counters for a session.
Virtual Private Network Commands
OL-28460-01