P2P - Cisco XR 12000 Series Command Reference Manual

p2p

p2p
To enter p2p configuration submode to configure point-to-point cross-connects, use the p2p command in
L2VPN xconnect mode. To return to the default behavior, use the no form of this command.
p2p xconnect-name
no p2p xconnect-name
Syntax Description
xconnect-name
Command Default
None
Command Modes
L2VPN xconnect
Command History
Release
Release 3.4.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The name of the point-to-point cross-connect string is a free format description string.
Task ID
Task ID
l2vpn
Examples The following example shows a point-to-point cross-connect configuration (including pseudowire
configuration):
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# l2vpn
RP/0/0/CPU0:router(config-l2vpn)# xconnect group group 1
RP/0/0/CPU0:router(config-l2vpn-xc)# p2p xc1
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
74
(Optional) Configures the name of the point-to-point cross- connect.
Modification
This command was introduced.
Operations
read, write
Virtual Private Network Commands
OL-28460-01