Retransmit (L2Tp) - Cisco XR 12000 Series Command Reference Manual

retransmit (L2TP)

retransmit (L2TP)
To configure retransmit retry and timeout values, use the retransmit command in L2TP class configuration
mode. To return to the default behavior, use the no form of this command.
retransmit {initial initial-retries| retries retries| timeout {max| min} timeout}
no retransmit {initial initial-retries| retries retries| timeout {max| min} timeout}
Syntax Description
initial initial-retries
retries retries
timeout {max | min}
timeout
Command Default
initial retries: 2
retries: 15
min timeout: 1
max timeout: 8
Command Modes
L2TP class configuration
Command History
Release
Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
78
Configures the number of SCCRQ messages resent before giving up on a
particular control channel. Range is 1 to 1000. Default is 2.
Configures the maximum number of retransmissions before determining that
peer router does not respond. Range is 5 to 1000. Default is 15.
Configures the maximum and minimum retransmission interval in seconds
for control packets. Range is 1 to 8. Maximum timeout default is 8 seconds.
Minimum timeout default is 1 second.
Modification
This command was introduced.
Operations
read, write
Virtual Private Network Commands
OL-28460-01