Clear L2Tp Tunnel - Cisco XR 12000 Series Command Reference Manual

clear l2tp tunnel

clear l2tp tunnel
To clear L2TP tunnels, use the clear l2tp tunnel command in EXEC mode.
clear l2tp tunnel {all| id tunnel id| l2tp-class class name| local ipv4 ipv4 address| remote ipv4 ipv4 address}
Syntax Description
all
id tunnel id
l2tp-class class name
local ipv4 ipv4 address
remote ipv4 ipv4 address
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples The following example shows how to clear all L2TP tunnels:
RP/0/0/CPU0:router# clear l2tp tunnel all
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
14
Clears all L2TP tunnels.
Clears a specified tunnel.
Clears all L2TP tunnels based on L2TP class name.
Clears all local tunnels based on the specified local IPv4 address.
Clears all remote tunnels based on the specified local IPv4 address.
Modification
This command was introduced.
Operations
read, write
Virtual Private Network Commands
OL-28460-01