[Camera] > [Camera] Configuring Video Settings; Adjusting The Focus - Canon ME20F-SHN Network Operation Manual

[Camera] > [Camera]
Configuring Video Settings
Configure settings such as video quality compensation. If you change settings, the changes are immediately reflected in
the video display area and Viewer.
Note
When a power zoom lens is attached,
please refer to P. 47.

Adjusting the Focus

The camera offers two focusing methods: one-shot AF and manual focus.
Clicking on the side of video display automatically adjusts the focus once, and then switches to the manual mode.
You can click and hold the
The following procedure enables you to adjust the focus appropriately.
1. Select [Av] in [Camera Mode], and move the iris slider to the left limit to fully open the aperture. The depth of field
becomes shallow, and you can adjust the focus appropriately.
2. To adjust the focus, click and hold the [Far] or [Near] button in [Adjust Focus], or click [One-shot AF].
3. When you have finished adjusting the focus, change [Camera Mode] to an appropriate setting.
Set the focus mode switch on the attached lens to AF or SERVO in advance.
Difficult to Focus with One-shot AF
Reflective Subjects with low
surfaces contrast or without
vertical lines
(Zoom in) / (Zoom out) buttons are displayed. For information on the button operation,
(Near) and (Far) buttons to adjust the focus in the near and far directions.
Fast moving Through dirty or
subjects wet windows
The following settings can be configured here.
• Adjusting the Focus
• Camera Settings
• Custom Picture
Low-light scenes
4
81