[Server] > [Audio Server] Audio Transmission Setting; Audio Server - Canon ME20F-SHN Network Operation Manual

[Server] > [Audio Server]
Audio Transmission Setting
Set the audio input from the microphone connected to the camera.
Important
• Video and audio can be distributed to up to 30 clients. However, when there are many clients or they are connected to the camera over
an SSL/TLS connection, the video frame rate may slow down and the sound may drop out if audio reception from the camera is
enabled.
• The video and audio may not be synchronized.
• The audio may be temporarily interrupted, depending on the performance of the computer and the network environment.
• The audio may be interrupted if anti-virus software is enabled.
• Communication may be temporarily interrupted, cutting off the audio, if the LAN cable is unplugged and plugged in again. If this
occurs, reconnect from the Viewer.
• The volume, sound quality, etc., may change depending on the characteristics of the microphone used.

Audio Server

Set audio transmission from the microphone.
[Audio Transmission from the Camera]
Select [Enable] to transmit audio from the microphone connected to the camera to the Viewer.
[Voice Activity Detection]
Select whether to detect when there is no sound coming from the microphone.
When set to [Enable], audio data transmission will pause while there is no sound input from the camera. This can reduce the
load on the network used.
104
The following settings can be configured here.
• Audio Server
Network