Canon ME20F-SHN Network Operation Manual page 131

[Paste detection area/line]
Paste the copied detection area/line from the clipboard to the detection setting being configured. Paste cannot be used
with camera tampering detection.
Pasting a detection line is possible only when setting passing detection in the copy source and the paste target.
[Clear detection area/line]
Delete the detection area/line of the selected detection setting. If the shape of the area is rectangular, or the area is a
camera tampering detection area, the area cannot be deleted.
4
[Copy detection condition settings]
Copy the detection criteria of the selected detection setting to the clipboard. The detection settings name and display color
are not copied.
[Paste detection condition settings]
Paste the copied detection criteria from the clipboard to the detection setting being configured. Pasting is possible only if
the source and the target are the same detection type.
[Copy event settings]
Copy the event settings of the selected detection setting to the clipboard.
[Paste event settings]
Paste the copied event settings from the clipboard to the detection setting being configured.
[Copy non-detection area]
Copies a non-detection area that has been set to the clipboard.
[Paste non-detection area]
Pastes a non-detection area copied to the clipboard to the non-detection area that is being set.
[Clear non-detection area]
Deletes the non-detection area that is being set.
131