[Event] > [Infrared Switching] Executing Presets When Switching Infrared Mode; Infrared Switching - Canon ME20F-SHN Network Operation Manual

[Event] > [Infrared Switching]
Executing Presets When Switching Infrared Mode
When events trigger the switching of infrared mode, presets registered in advance can be executed, such as changing the
camera angle or video quality settings.

Infrared Switching

[Preset when Switching to Normal Capture]
Executes the preset when switched to normal capture.
[Preset when Switching to Infrared]
Executes the preset when switched to the infrared mode.
Important
When the user has camera control privileges, the presets for [Preset when Switching to Normal Capture] and [Preset when Switching to
Infrared] will not run.
Note
• It is necessary to set presets beforehand with [Camera] > [Preset] (P. 89).
• You can set the timing for event-triggered infrared switching in [Infrared Switching] in [External Device Input] (P. 107) or [Timer] (P. 109).
134
The following settings can be configured here.
• Infrared Switching